Sanitary Safety Valve

Liquid level gauge / liquid level valve
The level gauge is mainly applied to the tank equipments. The two same gauges or two different gauges are assembled on the tank so that the liquid condition or capacity can be odserved and the sample can be extracted.
• Size:1/4″,3/8″,1/2″,3/4″
• Connections: thread, clamp, weld

Working principle
• when turn the hand wheel clockwise, the valve shaft and seal rise up. At this time, valve is open for sampling. When turn the hand wheel anti-clockwise, the valve shaft and seal go down,at that time, the valve is closed.
• Thread; Nut; welding; Clamps

Safety valve is the sanitary stainless steel installed in the return circuit of discharge pressure,it’s good for safety protect function in pipeline,pump, device,storage
tank.
Extensiveloy use to food, beverage, dairy, beer industry,etc

Technical Specifications:

● Size:1″-4″ ,DN25-DN100
● KV Value: 8.5-180m3/h
● Max. temperature：130℃(EPDM)/266℉
● Set pressure：(0-3bar/0-6bar/6-10bar）
● Material：304/316L

Application
• pipe fittings can be connect pipeline and equipment with process controller, such as food, beverages, wine, dairy products, pharmaceutical and other high technology requirements of the pipeline.
• size:1”-6”
• Material:304,304L,316L
• Connection: clamp, welded ,threaded

Sampling valve
The sampling valve is no dead angle-free design and the end face connected to the container does not has a dead zone phenomenon.
• It is mainly used for sample collection of materials in tank equipment or pipelines. It can also be installed at the lowest point of tank equipment or pipelines to drain residual liquid.
• Working principle: the handwheel rotates the valve stem clockwise together with the sealing ring. At this time, the valve is opened for sampling. The handwheel rotates the valve stem counterclockwise together with the sealing ring. The valve is closed.
• Applicable temperature: -10 ° C to 130 ° C
• valve body material: AISI 304 AISI 316L
• Sealing material: PTFE
• Connection method: clamp type, thread type, welding type, nut type

Technical Specifications:

Type: Round, Hexagon, With rubber anti-vibration
Size:1/2″-8″ , DN10-DN200
Material:304/316
Connection: Welded, Threaded